Our Rotary President's neckless has been newly designed with the latest Rotary Logo. Whether in Rotary or Rotaract, this medallion is the perfect gift for new president or charter gift to the new club. A blue ribbon carries the high quality medallion. Up to 40 nameplates can be attached to the ribbon.We can customize your chain with the name of the new president! Just add items RCB 08a and RCB 08b to your cart!
Name plates for president necklace. Engraving per plate costs 9,00 EUR e.g. “Peter Smith 20XX/XX”. The golden nameplate bars are 45 mm x 7mm in size. Two tiny pins on the back of the nameplate can be used to attach the name plate to the band of the presidential necklace. The size allows a single to maximum double spaced engraving consisting , for example, of the name of the president and their year.In case of interest of an engraved name please add ONLY the article “Engraved name platter bar” to the shopping cart (Article RCB08b) and attach the text at the end of your order under notifications.For a consistent appearance we recommend buying a supply of name plates. The engraving can then be done by a local professional.
High-quality laser-engraved brass plates for presidential necklaces.
Since the tiles only have limited space, the first name is abbreviated. Thus it is engraved as follows:
M. Mustermann 2022-23 If you would like a different engraving, please contact us beforehand. For a larger number of tiles, we ask you to send us an Excel list to our e-mail address, this simplifies and speeds up the processing process.
Our email address: info@club-merchandise.eu
Rotary introduction-package, perfect for new members of Rotary.Included in the Packkage:1. Rotary basic knowledge - All important informations about Rotary (ONLY GERMAN)2. Rotary Pin 9 mm - for attachment to the rever3. Rotary Member-certificate in a Leatherfolder for a festive handover4. Rotary 4-way-test as check card - to ensure the knowledge of the 4-way-test5. Rotary Member ID card - ID card with the most important details * To ensure short delivery, a voucher code will be included in the package. The Member ID card can be post-ordered after knowledge of actual Member ID. This process can take a few months.
THIS BOOK IS ONLY AVAILABLE IN GERMAN.Rotary Wissen is a german Book former known as Rotary ABC. It informs about the most important questions about Rotary and gives short but precise answers.Gives an overview about the rotary precedure manual and the basic Rotary documents.Publisher: Rotary Verlag Hmburg Germanysliding-scale prices
High quality paper folder suitable for special occasions such as district assemblies, GETS, PETS, SETS, club meetings or as a folder for new members, documents or certificates. A4 format with 5 mm filling height in Rotary blue (Pantone 286).The Rotary logo is printed in the bottom right corner.
Piggy Bank with Rotary Logo on both sides. Ideal for fundraisers or the office. The Piggy Bank has a rubber lid at the bottom. We can include a Piggy Bank with lock and key. Please select that option. Size:Length: 16cmWidth: 12cmHight: 12cm
Practical donation box with Rotary print. Very suitable for fundraisers and other Rotary fundraising campaigns.Highly recognizable thanks to the Rotary logo on the can.The can can be sealed with a locking pin and seals. At the top, the box has a slot for coins and a hole for rolled bills.
Brass sign with engraved Rotary logo. The hotel sign is intended for mounting on the exterior facade of a club or meeting hotel.The Rotary logo and the font are engraved and laid out in black. Four holes in the corners ensure easy installation. All materials are high quality processed for a flawless appearance. Because of the numerous wall-materials the screws are not part of the product.The hotel sign is available in two different versions. The classic Rotary Wheel "Mark of Excellence" in portrait format or the "Masterbrand" logo in landscape format.Size variant "Mark of Excellence": approx. 200 x 300 x 3mmSize "Masterbrand" variant: 300 x 200 x 3mmProduction takes about 1-2 weeks. Express may be possible on request.Please tell us the desired lettering in the "Comments" field at the end of the ordering process. The labeling is centered by default.If you would like a different design, please send us an email to info@club-merchandise.deBeware of an increased risk of corrosion when coming into contact with salty sea air
The Rotary logo appears here on colourless, transparent Acrylic Glass. The high gloss material can be easily cleaned. The sign can easily be attached to any wall. Our hotel signs are UV- Resistant, fade resistant and hold of well in the rain. The Acrylic Material is clearer and lighter than real glass. This sign can be attached in or outdoors.
Bright high quality plastic name badge with engraving and attached Rotary wheel. Size: 80 x 30 mm. Attachment: Magnet or combination of clip/needle.Our elegant name badges are very popular, as the name is legible in sufficient size without being too obtrusive. The attached 15 mm Rotary emblem out of golden metal gives the badge a classy look compared to other dull plastic badges. Our badge is engraved and not printed! A strong magnet keeps the badge in place on all suits and textiles without unnecessary holes.If desired, this product is also available with a needle or a clip.Please note, we have two different logo versions available. The "legacy logo" ( with blue color in the emblem) and the current "mark of excellence" logo.Furthermore, you can add your function in the club or district e.g. “President”, “Assistant Governor”, “Youth-Exchange Officer”, or your profession eg. “Lawyer”, “Architect” etc.From an order quantity of 5 pieces onwards the price reduces to 22.90 EUR per piece (club order). As we can only engrave the badges once we received the names, we kindly ask you to notify us if you wish partial delivery of other stock products from your cart. You can insert the names and details for the badges one below the other in the “remarks” field at the end of our checkout or send us an Excel File after completing the order to support@club-merchandise.de. This shortens the production process.Pre- and sirnames are engraved in one line. If your name too long it might has to be engraved in two lines. Names are engraved in capital letters, club names in capital- and small letters.
For safer storage of club name badges, e.g. in the club room.This aluminum case is only designed to store our white name badges (RCB 04).The dimensions of the case are:Length: 32 cm, width: 24 cm and height: 4 cmSuitable for ..45 name badges with magnet (3 rows of 15 name badges each)or21 name badges with clamp / needle (3 rows of 7 name badges)There is suitably cut foam in the case to protect the name badges from scratches.
The name tag - logo in the middle- provides you with a new opportunity to be recognized in the right way at any rotarian event through its simple and readable design. The eye-catching part is the centered logo above the centered name and club-name.
Name badge for officials. 88 x 70mm made of acrylic glassThe design of the name badge can be customized. It is advisable to emphasize the first name for the international package. You can choose to close it with a magnet or a clip with a pin. When ordering, please simply state which configuration is required in the corresponding field. We will send you a release graphic in advance.For orders of more than 10 signs, e.g. for district committees, governr crews or board members, we are happy to offer you graduated prices. The price per sign then drops to 19.90 EUR / sign.
Individual name badge made of plastic with magnetic fastening in the new "Classic" design.Size: 7x3cm and slightly curved front plate.Up to 4 lines can be printed. No engraving possible. The rotary wheel is also printed and not attached. The name plate is inserted into the holding plate and securely fixed.Please enter the desired name and text in the corresponding field. When ordering a club, you can also send us the list by email to the following address: info@club-merchandise.eu
Individual name tags made of plastic with a magnetic attachment. Size: 7 cm x 3 cm and a slightly bent front plate. The tag is available in two colors: silver and gold.Up to three lines can be printed. Engraving is not possible. The Rotary wheel is also printed and not piled. The name tag is slid into the bracket and locked safely. Please enter the required name and print at the end of your order under remarks.The name tag ist printed with the name and club-name. In case the name is too long it'll be printed in two lines. Therefore please regard the second product photo!The layout of the text can differ from the name tag shown in the product photo.
Dark brown wooden gavel matching the mounting boards of our gongs.Through a light strike against the bell, a rich melodic tone is produced with our gavel without damaging the bell.
We proudly present the “official Rotary membership ID” according to the specifications from Evanston. It is a standard plastic card similar to all common bank cards. The official design is binding for all manufacturers and internationally accepted. Your personal details are added onto a high quality pre manufactured off set print card. On the back there is a box for your personal signature. The cards are highly suitable for club visits or help to speed up the registration on international conferences. After completing your order please fill out following Excel-document: Excel-Liste Rotary Mitgliedsausweise and send it to info@club-merchandise.euIn case your club has already ordered membership cards and paid the club-administration fee you can reorder cards for a reduced fare here: Mitgliedsausweis (Club-Nachbestellung) (RCB 51)
149,- EUR for a one-time target cost per club and 5,90 EUR for each customized membership card. As a club you get the opportunity to reorder the cards if you lose it or any new admissions come up. It will cost you 5,90 EUR each plus the postage for a letter without any new basic charge (10 years Validity)
If you or your club have already paid the setup fee for the membership card in the past, you can add this item to the shopping cart as a reorder.If the setup fee has not yet been paid, please order the following item in the desired number: RCB 02 membership card (new club order)After completing this order, please send the following Excel file to us via email: info@club-merchandise.euExcel list: Excel list Rotary membership cards
Black plastic with raised shiny silver Masterbrand with adhesive strip on the back, can be attached to cars or anywhere you want to show off the Masterbrand.Size: 10,5cm x 4cmx0,4cm
If you would like to receive a hard copy of our catalogue please do not hesitat to put this product into your shoping cart. You may also order as many copies as you need to distribute it in your club or district for bulk order.The offer on our website is more updated of course, but the cataloge is issued at least once a year with all new items.
For your function within Rotary we can produce your customized business / name cards.- 200 pcs,- 85 x 55 mm,- 4/0 colored (i.e. one-sided) color printing,- 300g/m2 digital printing paper.The business cards are delivered in small paper-boxes and can be ordered in unlimited quantities from 200 pieces onwards. Our company designs and adjusts the business cards according to the customer’s requests. Picture editing and PDF preview for approval sent by mail are included in the price. To design the card, please send us your details, including club logo or personal pictures, via e-mail: support@club-merchandise.eu.Please note that for printing, high-resolution graphics are necessary. We can supply all official, non club-specific Rotary logos. You can also attach a draft or a word document your desired design.
€58.00*
This website uses cookies to ensure the best experience possible. More information...
